Wednesday, November 18, 2026

this sucks - or it would, if I could find one

from a vacuum cleaner silencer patent

  So, I bought my ShopVac™ shop vac used, somewhere online - Craig's List or eBay - about twenty years ago.  It needed some plastic parts to be replaced, but back then, they were still available so I did that.  And it was fine for years of heavy use.

 I've used it a fair bit.  But now, plastic parts are breaking, making it difficult or less effective to use, so despite the fact that the turbine still works fine, and the tank is still in good shape, the tall metal handle is falling off because the plastic bits it fits into are broken.  Parts for this old machine are no longer available.

 So I started shopping for a new one.  First, I got sticker shock, then I became increasingly irritated that I simply cannot buy anything similar to the old shop vac.

 I can have the tall handle and two big wheels, but not with a stainless tank or quiet turbine housing.

 I can have quiet turbine housings, but not with a tall stainless tank.

 I can have tall stainless tanks with 10+ gal capacity, but not with any other features.

 There is only one place left in the shop to store the vacuum, it has lived there for decades.  If I were to get one of the short and squat vacuums (most of which are quiet) it wouldn't fit where it must fit.  And it really must be a quiet model, I've grown quite attached to not needing hearing protection when I use it.

 DeWalt has a line of VERY quiet units, but they are 100% short, squat, plastic tanks.  They won't fit the available storage space.  When I say my shop is full, I don't exaggerate.  If I want to stretch, I have to go outside. ^_^

 And when you're wheeling the unit a little too carefree by pulling on the hose, and it whacks into one of the machines you have lying about your shop, a stainless tank will get a dent which can be pounded out if you even care, but a plastic tank will crack, after which it leaks and cracked plastics can be very hard to fix.  Plastic welding doesn't usually turn out well...

 Now I don't want to buy a new vacuum at all, sheesh!

 So I'm considering printing new parts but that seems like a lot of time to do the complex modeling of things which are all curves, and each curve is different.  I was good in SolidWorks, but that's gone now and I keep having to learn new (free) CAD programs...

(stop making me learn stuff, dammit, my head is full)


 Still, the printer needs a new project since I put it all back together.  I might need to run some more Benchies and CHEP cubes to dial in the quality - I'm not 100% certain it's ready for prime time, but if not, it's probably only a few hours from being ready.

 I'm also unsure whether I have any extra-strong filament.  I have stainless nozzles for sure, I just need - maybe - some carbon- or glass-filled nylon filament.

 I'll watch some strength test videos first, maybe PLA will serve.

 Frankly, I wasn't ready to revisit this problem, but I loaned it out and it came back with one of the handles broken off. (they are in poor, cracked, condition, they break easily, and the big handle - with enormous leverage - passes through them also.  It's a dumb design.)

 That's right; I loaned out a tool
and it came back broken.
  It is the story of our lives,
but we share and share alike
so what can I do, divorce her?
😂

 There was no abuse, this thing has been dying by degrees for years.  But I can't find a replacement that ticks all of my boxes, and I'm mad about it.


 ~≈{👁}≈~

No comments: